PTFE SHEET
Characteristic of the products:
PTFE molded sheet is manufactured by molding with PTFE granular resin.PTFE is the most chemical resistance of all know plastics.It does not age.It has the lowest coefficient of friction of all know solid materials.
Use of the products:
It can be used to make corrosion-resistant liner, seal, lining and gasket, scrap, guide rail, dielectric material for different frequency, bridge bearing slide..
Main technical data:
Project Name Target
Tensile strength 15.0 MPa
Ultimate elongation 150 400 %
Apparent density 2.2 2.3 g /cm 3
Dialectic strength 10 KV/mm
Resistance of surface
(Working voltage 500V) 3.7 x 10 16
Specification: PTFE Molding Sheets
Size(mm)
L x W Thickness(mm)
Nominal Tolerance
250x250 2~80 0.30~0.50
300x300 2~80 0.30~0.50
400x400 3~80 0.30~0.50
450x450 3~80 0.30~0.50
500x500 3~80 0.30~0.50
600x600 3~80 0.30~0.50
800x800 3~80 0.30~0.50
1000x1000 3~80 0.30~0.50
1200x1200 4~80 0.30~0.50
1500x1500 3~80 0.30~0.50
1000x2000 5~60 0.30~0.60
1800x1800 10~60 0.30~0.60
|
