|
Characteristics:
Two types of PTFE rods are available. The rods of diameter 4-9mm are extruded from dispersion PTFE resin, those of diameter 10-50mm are plunger-extruded from suspension PTFE and that of diameter above 50mm die-pressed. Pressed rod, extruded rod, die-pressed rod, diameter 10 mm-50mm
Appearance:
It should be homogeneous in structure, with smooth surface,but without the crack,air bubble,flatted,mechanical damage and so on.
Application:
It is used to make bearing strip,sealing,lubricant,non-stick parts and electric insulation parts of all sorts of frequency.
Main technical data:
| Project Name |
Target |
| Apparent density |
2.10 ~ 2.30 g/cm 3 |
| Tensile strength |
14.0 MPa |
| Ultimate elongation |
140 % | |
